Re: 4D: Linphone Desktop 4.1.1 - Qt5.9.0

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Re: 4D: Linphone Desktop 4.1.1 - Qt5.9.0

A John
Thanks, for your reply Russell.

I have tried changing the DTMF's sending method to 'RFC 2833' and 'SIP Info', but still cannot press the on-screen dialing pad:



Is there anything else that can be changed to get this to work?

Regards,



On 27 July 2018 at 17:30, A John <[hidden email]> wrote:
LINPHONE 
---------- Forwarded message ----------
From: Russell Treleaven <[hidden email]>
Date: 27 July 2018 at 17:02
Subject: Re: [Linphone-users] Linphone Desktop 4.1.1 - Qt5.9.0
To: [hidden email]


I think you mean that dtmf https://en.wikipedia.org/wiki/Dual-tone_multi-frequency_signaling is not being received and understood  by your peer.

look at linphone->preferences->network->transport->DTMF's sending method
RFC 2833 is typical but your peer may require SIP Info.



On Fri, Jul 27, 2018 at 11:15 AM, A John <[hidden email]> wrote:
Hi,

I have successfully called and connected to a SIP number, but when prompted to enter a number on the keypad, the keypad does not respond to the numbers I have entered.

Please advise?

--
Regards,

Alex John

_______________________________________________
Linphone-users mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/linphone-users




--
Sincerely,

Russell Treleaven
[hidden email];transport=tcp


_______________________________________________
Linphone-users mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/linphone-users




--
Regards,

Alex John



--
Regards,

Alex John

_______________________________________________
Linphone-users mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/linphone-users