Re: Compilation without speex

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

Re: Compilation without speex

Kushal Dalal
Hello,

Thanks again. It solved my compilation problem.
But at time of installation it shows following error.

'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Making all in console
make[2]: Entering directory `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
/bin/sh ../libtool --mode=link armv4l-unknown-linux-gcc -Wall -Werror? -DENABLE_TRACE -D_ORTP_SOURCE? -O2 -fno-exceptions -I../support ../oRTP/src/libortp.la -L/armbuild/usr/lib -lspeex -lm -L/armbuild/usr/lib -losipparser2 -losip2? -o linphonec? linphonec.o commands.o ../coreapi/liblinphone.la -ldl
armv4l-unknown-linux-gcc -Wall -Werror -DENABLE_TRACE -D_ORTP_SOURCE -O2 -fno-exceptions -I../support -o .libs/linphonec linphonec.o commands.o? ../oRTP/src/.libs/libortp.so -L/armbuild/usr/lib -lspeex -lm -losipparser2 -losip2 ../coreapi/.libs/liblinphone.so -ldl
armv4l-unknown-linux-gcc: ../coreapi/.libs/liblinphone.so: No such file or directory
make[2]: *** [linphonec] Error 1
make[2]: Leaving directory `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0'
make: *** [all] Error 2
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
please help me to solve it.

Thanks
-Kushal
Kushal Dalal
Embedded Engineer
eInfochips Limited.
Email: [hidden email]


Simon Morlat wrote:
I think I already see that with arm-gcc-2.95: just turn off optimisation 
(remove -02 in the gsmlib/Makefile) and it works.

Simon

Le Mercredi 19 Octobre 2005 13:28, Kushal Dalal a ?crit?:
  
Hello,

Thanks. I am able to compile Speex-1.0.5 with my toolchain.
Previously I was trying Speex-1.1.6. It's ok as it is enough.
Now while compiling linphone as mentioned in README.arm,
it gives following error.
I have pasted that part..

""""""""""""""""""
source='code.c' object='code.lo' libtool=yes \
depfile='.deps/code.Plo' tmpdepfile='.deps/code.TPlo' \
depmode=gcc /bin/sh ../depcomp \
/bin/sh ../libtool --mode=compile armv4l-unknown-linux-gcc
-DHAVE_CONFIG_H -I. -I. -I..   -O2 -fno-exceptions -w -O2
-fno-exceptions -I../support -c -o code.lo code.c
 armv4l-unknown-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -O2
-fno-exceptions -w -O2 -fno-exceptions -I../support -c code.c
-Wp,-MD,.deps/code.TPlo  -fPIC -DPIC -o .libs/code.o
/tmp/ccM7d2bX.s: Assembler messages:
/tmp/ccM7d2bX.s:96: Error: Can not represent OFFSET_IMM8 relocation in
this object file format (1)
/tmp/ccM7d2bX.s:98: Error: Can not represent OFFSET_IMM8 relocation in
this object file format (1)
make: *** [code.lo] Error 1
"""""""""""""""""""""""""""""""""""""""""""""
Can I compile without GSM codec as I don't need it?
Or how to solve above problem?

Thanks in advance.
-Kushal

Kushal Dalal
Embedded Engineer
eInfochips Limited.
Email: [hidden email]

Simon Morlat wrote:
    
Hello,

The speex dependency is mandatory.
However it is quite easy to cross compile speex on arm:

taken from my README.arm in linphone's tree:

Cross compiling speex for ARM:
********************************
First you need to remove ogg headers from your build system to avoid a
dirty conflict between
your build machine binaries and the arm binaries. They are usually in a
libogg-dev package (rpm or deb).
Then:
./configure --prefix=/usr --host=arm-linux --with-gnu-ld --disable-static
--enable-fixed-point --enable-arm-asm
make
make install DESTDIR=$ARM_INSTALL_TREE
make install DESTDIR='pwd'/armbuild

Simon

Le Mardi 18 Octobre 2005 15:17, Kushal Dalal a ?crit :
      
Hello,

I am cross compiling linphonec-1.1.0  for ARM - MIZI Embedded Linux
platform.(for Samsung S3C2410 board.)
I am using cross compilaton tool chain by MIZI.
I would like to remove speex depedancy for the package.
I tried "--with-speex=no" and "--without-speex" while running configure
script.
But it is not working. I think there is a bug in that script at speex
part. What could be the solution?
Even I am not able to cross compile Speex with my tool chain !!..

Thanks in advance.

-Kushal Dalal
        
Disclaimer: This e-mail and any attachment is for authorized use by the
intended recipients only. It may contain proprietary material,
confidential information and/or be subject to legal privilege of
eInfochips Ltd. If you have received this message in error, please notify
the originator immediately. If you are not the intended recipient, you
are notified that you are strictly Prohibited from retaining, using,
copying, altering or disclosing the contents of this message.
      


Disclaimer: This e-mail and any attachment is for authorized use by the intended recipients only. It may contain proprietary material, confidential information and/or be subject to legal privilege of eInfochips Ltd. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly Prohibited from retaining, using, copying, altering or disclosing the contents of this message.


  

_______________________________________________
Linphone-users mailing list
[hidden email]
http://lists.nongnu.org/mailman/listinfo/linphone-users
Reply | Threaded
Open this post in threaded view
|

Re: Compilation without speex

Kushal Dalal
Hello,

Dont consider previous one, actually it shows this error at the installation time.

''''''''''''''''''''''''''''''''''''''''''''''''''
make[1]: Leaving directory `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/exosip'
Making install in coreapi
make[1]: Entering directory `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
make[2]: Entering directory `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
test -z "/usr/lib" || mkdir -p -- . "/armbuild/usr/lib"
?/bin/sh ../libtool --mode=install /usr/bin/install -c? 'liblinphone.la' '/armbuild/usr/lib/liblinphone.la'
libtool: install: warning: relinking `liblinphone.la'
(cd /home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi; /bin/sh ../libtool? --mode=relink armv4l-unknown-linux-gcc -Wall -Werror -DENABLE_TRACE -DG_LOG_DOMAIN="LinphoneCore" -DINET6 -D_ORTP_SOURCE -02 -fno-exceptions -I../support -o liblinphone.la -rpath /usr/lib -version-info 2:0:1 linphonecore.lo exevents.lo misc.lo arts.lo enum.lo sdphandler.lo presence.lo proxy.lo friend.lo authentication.lo lpconfig.lo chat.lo ../mediastreamer/libmediastreamer.la ../exosip/libeXosip.la -ldl -inst-prefix-dir /armbuild)
mv: can't stat source liblinphone.so.1.1.0
libtool: install: error: relink `liblinphone.la' with the above command before installing it
make[2]: *** [install-libLTLIBRARIES] Error 1
make[2]: Leaving directory `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
make[1]: *** [install-am] Error 2
make[1]: Leaving directory `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
make: *** [install-recursive] Error 1
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Kushal Dalal
Embedded Engineer
eInfochips Limited.
Email: [hidden email]


Kushal Dalal wrote:
Hello,

Thanks again. It solved my compilation problem.
But at time of installation it shows following error.

'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Making all in console
make[2]: Entering directory `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
/bin/sh ../libtool --mode=link armv4l-unknown-linux-gcc -Wall -Werror? -DENABLE_TRACE -D_ORTP_SOURCE? -O2 -fno-exceptions -I../support ../oRTP/src/libortp.la -L/armbuild/usr/lib -lspeex -lm -L/armbuild/usr/lib -losipparser2 -losip2? -o linphonec? linphonec.o commands.o ../coreapi/liblinphone.la -ldl
armv4l-unknown-linux-gcc -Wall -Werror -DENABLE_TRACE -D_ORTP_SOURCE -O2 -fno-exceptions -I../support -o .libs/linphonec linphonec.o commands.o? ../oRTP/src/.libs/libortp.so -L/armbuild/usr/lib -lspeex -lm -losipparser2 -losip2 ../coreapi/.libs/liblinphone.so -ldl
armv4l-unknown-linux-gcc: ../coreapi/.libs/liblinphone.so: No such file or directory
make[2]: *** [linphonec] Error 1
make[2]: Leaving directory `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0'
make: *** [all] Error 2
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
please help me to solve it.

Thanks
-Kushal
Kushal Dalal
Embedded Engineer
eInfochips Limited.
Email: [hidden email]
  


Simon Morlat wrote:
I think I already see that with arm-gcc-2.95: just turn off optimisation 
(remove -02 in the gsmlib/Makefile) and it works.

Simon

Le Mercredi 19 Octobre 2005 13:28, Kushal Dalal a ?crit?:
  
Hello,

Thanks. I am able to compile Speex-1.0.5 with my toolchain.
Previously I was trying Speex-1.1.6. It's ok as it is enough.
Now while compiling linphone as mentioned in README.arm,
it gives following error.
I have pasted that part..

""""""""""""""""""
source='code.c' object='code.lo' libtool=yes \
depfile='.deps/code.Plo' tmpdepfile='.deps/code.TPlo' \
depmode=gcc /bin/sh ../depcomp \
/bin/sh ../libtool --mode=compile armv4l-unknown-linux-gcc
-DHAVE_CONFIG_H -I. -I. -I..   -O2 -fno-exceptions -w -O2
-fno-exceptions -I../support -c -o code.lo code.c
 armv4l-unknown-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -O2
-fno-exceptions -w -O2 -fno-exceptions -I../support -c code.c
-Wp,-MD,.deps/code.TPlo  -fPIC -DPIC -o .libs/code.o
/tmp/ccM7d2bX.s: Assembler messages:
/tmp/ccM7d2bX.s:96: Error: Can not represent OFFSET_IMM8 relocation in
this object file format (1)
/tmp/ccM7d2bX.s:98: Error: Can not represent OFFSET_IMM8 relocation in
this object file format (1)
make: *** [code.lo] Error 1
"""""""""""""""""""""""""""""""""""""""""""""
Can I compile without GSM codec as I don't need it?
Or how to solve above problem?

Thanks in advance.
-Kushal

Kushal Dalal
Embedded Engineer
eInfochips Limited.
Email: [hidden email]

Simon Morlat wrote:
    
Hello,

The speex dependency is mandatory.
However it is quite easy to cross compile speex on arm:

taken from my README.arm in linphone's tree:

Cross compiling speex for ARM:
********************************
First you need to remove ogg headers from your build system to avoid a
dirty conflict between
your build machine binaries and the arm binaries. They are usually in a
libogg-dev package (rpm or deb).
Then:
./configure --prefix=/usr --host=arm-linux --with-gnu-ld --disable-static
--enable-fixed-point --enable-arm-asm
make
make install DESTDIR=$ARM_INSTALL_TREE
make install DESTDIR='pwd'/armbuild

Simon

Le Mardi 18 Octobre 2005 15:17, Kushal Dalal a ?crit :
      
Hello,

I am cross compiling linphonec-1.1.0  for ARM - MIZI Embedded Linux
platform.(for Samsung S3C2410 board.)
I am using cross compilaton tool chain by MIZI.
I would like to remove speex depedancy for the package.
I tried "--with-speex=no" and "--without-speex" while running configure
script.
But it is not working. I think there is a bug in that script at speex
part. What could be the solution?
Even I am not able to cross compile Speex with my tool chain !!..

Thanks in advance.

-Kushal Dalal
        
Disclaimer: This e-mail and any attachment is for authorized use by the
intended recipients only. It may contain proprietary material,
confidential information and/or be subject to legal privilege of
eInfochips Ltd. If you have received this message in error, please notify
the originator immediately. If you are not the intended recipient, you
are notified that you are strictly Prohibited from retaining, using,
copying, altering or disclosing the contents of this message.
      


Disclaimer: This e-mail and any attachment is for authorized use by the intended recipients only. It may contain proprietary material, confidential information and/or be subject to legal privilege of eInfochips Ltd. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly Prohibited from retaining, using, copying, altering or disclosing the contents of this message.


  

_______________________________________________
Linphone-users mailing list
[hidden email]
http://lists.nongnu.org/mailman/listinfo/linphone-users
Reply | Threaded
Open this post in threaded view
|

Re: Compilation without speex

Simon Morlat
Hello,

I've never seen this bug. Looks like a libtool bug.
Try with another version of libtool and run ./autogen.sh within linphone's
source to update build scripts.

Simon

Le Jeudi 20 Octobre 2005 07:57, Kushal Dalal a écrit :

> Hello,
>
> Dont consider previous one, actually it shows this error at the
> installation time.
>
> ''''''''''''''''''''''''''''''''''''''''''''''''''
> make[1]: Leaving directory
> `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/exosip'
> Making install in coreapi
> make[1]: Entering directory
> `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> make[2]: Entering directory
> `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> test -z "/usr/lib" || mkdir -p -- . "/armbuild/usr/lib"
>  /bin/sh ../libtool --mode=install /usr/bin/install -c  'liblinphone.la'
> '/armbuild/usr/lib/liblinphone.la'
> libtool: install: warning: relinking `liblinphone.la'
> (cd /home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi;
> /bin/sh ../libtool  --mode=relink armv4l-unknown-linux-gcc -Wall -Werror
> -DENABLE_TRACE -DG_LOG_DOMAIN="LinphoneCore" -DINET6 -D_ORTP_SOURCE -02
> -fno-exceptions -I../support -o liblinphone.la -rpath /usr/lib
> -version-info 2:0:1 linphonecore.lo exevents.lo misc.lo arts.lo enum.lo
> sdphandler.lo presence.lo proxy.lo friend.lo authentication.lo
> lpconfig.lo chat.lo ../mediastreamer/libmediastreamer.la
> ../exosip/libeXosip.la -ldl -inst-prefix-dir /armbuild)
> mv: can't stat source liblinphone.so.1.1.0
> libtool: install: error: relink `liblinphone.la' with the above command
> before installing it
> make[2]: *** [install-libLTLIBRARIES] Error 1
> make[2]: Leaving directory
> `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> make[1]: *** [install-am] Error 2
> make[1]: Leaving directory
> `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> make: *** [install-recursive] Error 1
> '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
>''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
>''''''''''''''''''
>
> Kushal Dalal
> Embedded Engineer
> eInfochips Limited.
> Email: [hidden email]
>
> Kushal Dalal wrote:
> > Hello,
> >
> > Thanks again. It solved my compilation problem.
> > But at time of installation it shows following error.
> >
> > '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
> >'''''''''''''''''''''''''''' Making all in console
> > make[2]: Entering directory
> > `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
> > /bin/sh ../libtool --mode=link armv4l-unknown-linux-gcc -Wall -Werror
> > -DENABLE_TRACE -D_ORTP_SOURCE  -O2 -fno-exceptions -I../support
> > ../oRTP/src/libortp.la -L/armbuild/usr/lib -lspeex -lm
> > -L/armbuild/usr/lib -losipparser2 -losip2  -o linphonec  linphonec.o
> > commands.o ../coreapi/liblinphone.la -ldl
> > armv4l-unknown-linux-gcc -Wall -Werror -DENABLE_TRACE -D_ORTP_SOURCE
> > -O2 -fno-exceptions -I../support -o .libs/linphonec linphonec.o
> > commands.o  ../oRTP/src/.libs/libortp.so -L/armbuild/usr/lib -lspeex
> > -lm -losipparser2 -losip2 ../coreapi/.libs/liblinphone.so -ldl
> > armv4l-unknown-linux-gcc: ../coreapi/.libs/liblinphone.so: No such
> > file or directory
> > make[2]: *** [linphonec] Error 1
> > make[2]: Leaving directory
> > `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory
> > `/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0'
> > make: *** [all] Error 2
> > '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
> >''''''''''''''''''''''''''''''''''''''''' please help me to solve it.
> >
> > Thanks
> > -Kushal
> >
> >Kushal Dalal
> >Embedded Engineer
> >eInfochips Limited.
> >Email: [hidden email]
> >
> > Simon Morlat wrote:
> >>I think I already see that with arm-gcc-2.95: just turn off optimisation
> >>(remove -02 in the gsmlib/Makefile) and it works.
> >>
> >>Simon
> >>
> >>Le Mercredi 19 Octobre 2005 13:28, Kushal Dalal a écrit :
> >>>Hello,
> >>>
> >>>Thanks. I am able to compile Speex-1.0.5 with my toolchain.
> >>>Previously I was trying Speex-1.1.6. It's ok as it is enough.
> >>>Now while compiling linphone as mentioned in README.arm,
> >>>it gives following error.
> >>>I have pasted that part..
> >>>
> >>>""""""""""""""""""
> >>>source='code.c' object='code.lo' libtool=yes \
> >>>depfile='.deps/code.Plo' tmpdepfile='.deps/code.TPlo' \
> >>>depmode=gcc /bin/sh ../depcomp \
> >>>/bin/sh ../libtool --mode=compile armv4l-unknown-linux-gcc
> >>>-DHAVE_CONFIG_H -I. -I. -I..   -O2 -fno-exceptions -w -O2
> >>>-fno-exceptions -I../support -c -o code.lo code.c
> >>> armv4l-unknown-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -O2
> >>>-fno-exceptions -w -O2 -fno-exceptions -I../support -c code.c
> >>>-Wp,-MD,.deps/code.TPlo  -fPIC -DPIC -o .libs/code.o
> >>>/tmp/ccM7d2bX.s: Assembler messages:
> >>>/tmp/ccM7d2bX.s:96: Error: Can not represent OFFSET_IMM8 relocation in
> >>>this object file format (1)
> >>>/tmp/ccM7d2bX.s:98: Error: Can not represent OFFSET_IMM8 relocation in
> >>>this object file format (1)
> >>>make: *** [code.lo] Error 1
> >>>"""""""""""""""""""""""""""""""""""""""""""""
> >>>Can I compile without GSM codec as I don't need it?
> >>>Or how to solve above problem?
> >>>
> >>>Thanks in advance.
> >>>-Kushal
> >>>
> >>>Kushal Dalal
> >>>Embedded Engineer
> >>>eInfochips Limited.
> >>>Email: [hidden email]
> >>>
> >>>Simon Morlat wrote:
> >>>>Hello,
> >>>>
> >>>>The speex dependency is mandatory.
> >>>>However it is quite easy to cross compile speex on arm:
> >>>>
> >>>>taken from my README.arm in linphone's tree:
> >>>>
> >>>>Cross compiling speex for ARM:
> >>>>********************************
> >>>>First you need to remove ogg headers from your build system to avoid a
> >>>>dirty conflict between
> >>>>your build machine binaries and the arm binaries. They are usually in a
> >>>>libogg-dev package (rpm or deb).
> >>>>Then:
> >>>>./configure --prefix=/usr --host=arm-linux --with-gnu-ld
> >>>> --disable-static --enable-fixed-point --enable-arm-asm
> >>>>make
> >>>>make install DESTDIR=$ARM_INSTALL_TREE
> >>>>make install DESTDIR='pwd'/armbuild
> >>>>
> >>>>Simon
> >>>>
> >>>>Le Mardi 18 Octobre 2005 15:17, Kushal Dalal a écrit :
> >>>>>Hello,
> >>>>>
> >>>>>I am cross compiling linphonec-1.1.0  for ARM - MIZI Embedded Linux
> >>>>>platform.(for Samsung S3C2410 board.)
> >>>>>I am using cross compilaton tool chain by MIZI.
> >>>>>I would like to remove speex depedancy for the package.
> >>>>>I tried "--with-speex=no" and "--without-speex" while running
> >>>>> configure script.
> >>>>>But it is not working. I think there is a bug in that script at speex
> >>>>>part. What could be the solution?
> >>>>>Even I am not able to cross compile Speex with my tool chain !!..
> >>>>>
> >>>>>Thanks in advance.
> >>>>>
> >>>>>-Kushal Dalal
> >>>>
> >>>>Disclaimer: This e-mail and any attachment is for authorized use by the
> >>>>intended recipients only. It may contain proprietary material,
> >>>>confidential information and/or be subject to legal privilege of
> >>>>eInfochips Ltd. If you have received this message in error, please
> >>>> notify the originator immediately. If you are not the intended
> >>>> recipient, you are notified that you are strictly Prohibited from
> >>>> retaining, using, copying, altering or disclosing the contents of this
> >>>> message.
> >>
> >>Disclaimer: This e-mail and any attachment is for authorized use by the
> >> intended recipients only. It may contain proprietary material,
> >> confidential information and/or be subject to legal privilege of
> >> eInfochips Ltd. If you have received this message in error, please
> >> notify the originator immediately. If you are not the intended
> >> recipient, you are notified that you are strictly Prohibited from
> >> retaining, using, copying, altering or disclosing the contents of this
> >> message.


_______________________________________________
Linphone-users mailing list
[hidden email]
http://lists.nongnu.org/mailman/listinfo/linphone-users
Reply | Threaded
Open this post in threaded view
|

Re: Compilation without speex

Kushal Dalal
Thanks
I am using ""ltmain.sh (GNU libtool) 1.4.3 (1.922.2.111 2002/10/23
02:54:36)"".
Which version is recomended?

Thanks
Kushal

Kushal Dalal
Embedded Engineer
eInfochips Limited.
Email: [hidden email]



Simon Morlat wrote:

>Hello,
>
>I've never seen this bug. Looks like a libtool bug.
>Try with another version of libtool and run ./autogen.sh within linphone's
>source to update build scripts.
>
>Simon
>
>Le Jeudi 20 Octobre 2005 07:57, Kushal Dalal a ?crit :
>  
>
>>Hello,
>>
>>Dont consider previous one, actually it shows this error at the
>>installation time.
>>
>>''''''''''''''''''''''''''''''''''''''''''''''''''
>>make[1]: Leaving directory
>>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/exosip'
>>Making install in coreapi
>>make[1]: Entering directory
>>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
>>make[2]: Entering directory
>>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
>>test -z "/usr/lib" || mkdir -p -- . "/armbuild/usr/lib"
>> /bin/sh ../libtool --mode=install /usr/bin/install -c  'liblinphone.la'
>>'/armbuild/usr/lib/liblinphone.la'
>>libtool: install: warning: relinking `liblinphone.la'
>>(cd /home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi;
>>/bin/sh ../libtool  --mode=relink armv4l-unknown-linux-gcc -Wall -Werror
>>-DENABLE_TRACE -DG_LOG_DOMAIN="LinphoneCore" -DINET6 -D_ORTP_SOURCE -02
>>-fno-exceptions -I../support -o liblinphone.la -rpath /usr/lib
>>-version-info 2:0:1 linphonecore.lo exevents.lo misc.lo arts.lo enum.lo
>>sdphandler.lo presence.lo proxy.lo friend.lo authentication.lo
>>lpconfig.lo chat.lo ../mediastreamer/libmediastreamer.la
>>../exosip/libeXosip.la -ldl -inst-prefix-dir /armbuild)
>>mv: can't stat source liblinphone.so.1.1.0
>>libtool: install: error: relink `liblinphone.la' with the above command
>>before installing it
>>make[2]: *** [install-libLTLIBRARIES] Error 1
>>make[2]: Leaving directory
>>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
>>make[1]: *** [install-am] Error 2
>>make[1]: Leaving directory
>>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
>>make: *** [install-recursive] Error 1
>>'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
>>''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
>>''''''''''''''''''
>>
>>Kushal Dalal
>>Embedded Engineer
>>eInfochips Limited.
>>Email: [hidden email]
>>
>>Kushal Dalal wrote:
>>    
>>
>>>Hello,
>>>
>>>Thanks again. It solved my compilation problem.
>>>But at time of installation it shows following error.
>>>
>>>'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
>>>'''''''''''''''''''''''''''' Making all in console
>>>make[2]: Entering directory
>>>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
>>>/bin/sh ../libtool --mode=link armv4l-unknown-linux-gcc -Wall -Werror
>>>-DENABLE_TRACE -D_ORTP_SOURCE  -O2 -fno-exceptions -I../support
>>>../oRTP/src/libortp.la -L/armbuild/usr/lib -lspeex -lm
>>>-L/armbuild/usr/lib -losipparser2 -losip2  -o linphonec  linphonec.o
>>>commands.o ../coreapi/liblinphone.la -ldl
>>>armv4l-unknown-linux-gcc -Wall -Werror -DENABLE_TRACE -D_ORTP_SOURCE
>>>-O2 -fno-exceptions -I../support -o .libs/linphonec linphonec.o
>>>commands.o  ../oRTP/src/.libs/libortp.so -L/armbuild/usr/lib -lspeex
>>>-lm -losipparser2 -losip2 ../coreapi/.libs/liblinphone.so -ldl
>>>armv4l-unknown-linux-gcc: ../coreapi/.libs/liblinphone.so: No such
>>>file or directory
>>>make[2]: *** [linphonec] Error 1
>>>make[2]: Leaving directory
>>>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
>>>make[1]: *** [all-recursive] Error 1
>>>make[1]: Leaving directory
>>>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0'
>>>make: *** [all] Error 2
>>>'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
>>>''''''''''''''''''''''''''''''''''''''''' please help me to solve it.
>>>
>>>Thanks
>>>-Kushal
>>>
>>>Kushal Dalal
>>>Embedded Engineer
>>>eInfochips Limited.
>>>Email: [hidden email]
>>>
>>>Simon Morlat wrote:
>>>      
>>>
>>>>I think I already see that with arm-gcc-2.95: just turn off optimisation
>>>>(remove -02 in the gsmlib/Makefile) and it works.
>>>>
>>>>Simon
>>>>
>>>>Le Mercredi 19 Octobre 2005 13:28, Kushal Dalal a ?crit :
>>>>        
>>>>
>>>>>Hello,
>>>>>
>>>>>Thanks. I am able to compile Speex-1.0.5 with my toolchain.
>>>>>Previously I was trying Speex-1.1.6. It's ok as it is enough.
>>>>>Now while compiling linphone as mentioned in README.arm,
>>>>>it gives following error.
>>>>>I have pasted that part..
>>>>>
>>>>>""""""""""""""""""
>>>>>source='code.c' object='code.lo' libtool=yes \
>>>>>depfile='.deps/code.Plo' tmpdepfile='.deps/code.TPlo' \
>>>>>depmode=gcc /bin/sh ../depcomp \
>>>>>/bin/sh ../libtool --mode=compile armv4l-unknown-linux-gcc
>>>>>-DHAVE_CONFIG_H -I. -I. -I..   -O2 -fno-exceptions -w -O2
>>>>>-fno-exceptions -I../support -c -o code.lo code.c
>>>>>armv4l-unknown-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -O2
>>>>>-fno-exceptions -w -O2 -fno-exceptions -I../support -c code.c
>>>>>-Wp,-MD,.deps/code.TPlo  -fPIC -DPIC -o .libs/code.o
>>>>>/tmp/ccM7d2bX.s: Assembler messages:
>>>>>/tmp/ccM7d2bX.s:96: Error: Can not represent OFFSET_IMM8 relocation in
>>>>>this object file format (1)
>>>>>/tmp/ccM7d2bX.s:98: Error: Can not represent OFFSET_IMM8 relocation in
>>>>>this object file format (1)
>>>>>make: *** [code.lo] Error 1
>>>>>"""""""""""""""""""""""""""""""""""""""""""""
>>>>>Can I compile without GSM codec as I don't need it?
>>>>>Or how to solve above problem?
>>>>>
>>>>>Thanks in advance.
>>>>>-Kushal
>>>>>
>>>>>Kushal Dalal
>>>>>Embedded Engineer
>>>>>eInfochips Limited.
>>>>>Email: [hidden email]
>>>>>
>>>>>Simon Morlat wrote:
>>>>>          
>>>>>
>>>>>>Hello,
>>>>>>
>>>>>>The speex dependency is mandatory.
>>>>>>However it is quite easy to cross compile speex on arm:
>>>>>>
>>>>>>taken from my README.arm in linphone's tree:
>>>>>>
>>>>>>Cross compiling speex for ARM:
>>>>>>********************************
>>>>>>First you need to remove ogg headers from your build system to avoid a
>>>>>>dirty conflict between
>>>>>>your build machine binaries and the arm binaries. They are usually in a
>>>>>>libogg-dev package (rpm or deb).
>>>>>>Then:
>>>>>>./configure --prefix=/usr --host=arm-linux --with-gnu-ld
>>>>>>--disable-static --enable-fixed-point --enable-arm-asm
>>>>>>make
>>>>>>make install DESTDIR=$ARM_INSTALL_TREE
>>>>>>make install DESTDIR='pwd'/armbuild
>>>>>>
>>>>>>Simon
>>>>>>
>>>>>>Le Mardi 18 Octobre 2005 15:17, Kushal Dalal a ?crit :
>>>>>>            
>>>>>>
>>>>>>>Hello,
>>>>>>>
>>>>>>>I am cross compiling linphonec-1.1.0  for ARM - MIZI Embedded Linux
>>>>>>>platform.(for Samsung S3C2410 board.)
>>>>>>>I am using cross compilaton tool chain by MIZI.
>>>>>>>I would like to remove speex depedancy for the package.
>>>>>>>I tried "--with-speex=no" and "--without-speex" while running
>>>>>>>configure script.
>>>>>>>But it is not working. I think there is a bug in that script at speex
>>>>>>>part. What could be the solution?
>>>>>>>Even I am not able to cross compile Speex with my tool chain !!..
>>>>>>>
>>>>>>>Thanks in advance.
>>>>>>>
>>>>>>>-Kushal Dalal
>>>>>>>              
>>>>>>>
>>>>>>Disclaimer: This e-mail and any attachment is for authorized use by the
>>>>>>intended recipients only. It may contain proprietary material,
>>>>>>confidential information and/or be subject to legal privilege of
>>>>>>eInfochips Ltd. If you have received this message in error, please
>>>>>>notify the originator immediately. If you are not the intended
>>>>>>recipient, you are notified that you are strictly Prohibited from
>>>>>>retaining, using, copying, altering or disclosing the contents of this
>>>>>>message.
>>>>>>            
>>>>>>
>>>>Disclaimer: This e-mail and any attachment is for authorized use by the
>>>>intended recipients only. It may contain proprietary material,
>>>>confidential information and/or be subject to legal privilege of
>>>>eInfochips Ltd. If you have received this message in error, please
>>>>notify the originator immediately. If you are not the intended
>>>>recipient, you are notified that you are strictly Prohibited from
>>>>retaining, using, copying, altering or disclosing the contents of this
>>>>message.
>>>>        
>>>>
>
>
>Disclaimer: This e-mail and any attachment is for authorized use by the intended recipients only. It may contain proprietary material, confidential information and/or be subject to legal privilege of eInfochips Ltd. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly Prohibited from retaining, using, copying, altering or disclosing the contents of this message.
>
>
>  
>


Disclaimer: This e-mail and any attachment is for authorized use by the intended recipients only. It may contain proprietary material, confidential information and/or be subject to legal privilege of eInfochips Ltd. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly Prohibited from retaining, using, copying, altering or disclosing the contents of this message.


_______________________________________________
Linphone-users mailing list
[hidden email]
http://lists.nongnu.org/mailman/listinfo/linphone-users
Reply | Threaded
Open this post in threaded view
|

Re: Compilation without speex

Simon Morlat
I use libtool 1.5.20

Simon

Le Lundi 24 Octobre 2005 15:40, Kushal Dalal a écrit :

> Thanks
> I am using ""ltmain.sh (GNU libtool) 1.4.3 (1.922.2.111 2002/10/23
> 02:54:36)"".
> Which version is recomended?
>
> Thanks
> Kushal
>
> Kushal Dalal
> Embedded Engineer
> eInfochips Limited.
> Email: [hidden email]
>
> Simon Morlat wrote:
> >Hello,
> >
> >I've never seen this bug. Looks like a libtool bug.
> >Try with another version of libtool and run ./autogen.sh within linphone's
> >source to update build scripts.
> >
> >Simon
> >
> >Le Jeudi 20 Octobre 2005 07:57, Kushal Dalal a écrit :
> >>Hello,
> >>
> >>Dont consider previous one, actually it shows this error at the
> >>installation time.
> >>
> >>''''''''''''''''''''''''''''''''''''''''''''''''''
> >>make[1]: Leaving directory
> >>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/exosip'
> >>Making install in coreapi
> >>make[1]: Entering directory
> >>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> >>make[2]: Entering directory
> >>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> >>test -z "/usr/lib" || mkdir -p -- . "/armbuild/usr/lib"
> >> /bin/sh ../libtool --mode=install /usr/bin/install -c  'liblinphone.la'
> >>'/armbuild/usr/lib/liblinphone.la'
> >>libtool: install: warning: relinking `liblinphone.la'
> >>(cd /home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi;
> >>/bin/sh ../libtool  --mode=relink armv4l-unknown-linux-gcc -Wall -Werror
> >>-DENABLE_TRACE -DG_LOG_DOMAIN="LinphoneCore" -DINET6 -D_ORTP_SOURCE -02
> >>-fno-exceptions -I../support -o liblinphone.la -rpath /usr/lib
> >>-version-info 2:0:1 linphonecore.lo exevents.lo misc.lo arts.lo enum.lo
> >>sdphandler.lo presence.lo proxy.lo friend.lo authentication.lo
> >>lpconfig.lo chat.lo ../mediastreamer/libmediastreamer.la
> >>../exosip/libeXosip.la -ldl -inst-prefix-dir /armbuild)
> >>mv: can't stat source liblinphone.so.1.1.0
> >>libtool: install: error: relink `liblinphone.la' with the above command
> >>before installing it
> >>make[2]: *** [install-libLTLIBRARIES] Error 1
> >>make[2]: Leaving directory
> >>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> >>make[1]: *** [install-am] Error 2
> >>make[1]: Leaving directory
> >>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
> >>make: *** [install-recursive] Error 1
> >>'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
> >>''
> >> ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
> >>'''' ''''''''''''''''''
> >>
> >>Kushal Dalal
> >>Embedded Engineer
> >>eInfochips Limited.
> >>Email: [hidden email]
> >>
> >>Kushal Dalal wrote:
> >>>Hello,
> >>>
> >>>Thanks again. It solved my compilation problem.
> >>>But at time of installation it shows following error.
> >>>
> >>>''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
> >>>' '''''''''''''''''''''''''''' Making all in console
> >>>make[2]: Entering directory
> >>>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
> >>>/bin/sh ../libtool --mode=link armv4l-unknown-linux-gcc -Wall -Werror
> >>>-DENABLE_TRACE -D_ORTP_SOURCE  -O2 -fno-exceptions -I../support
> >>>../oRTP/src/libortp.la -L/armbuild/usr/lib -lspeex -lm
> >>>-L/armbuild/usr/lib -losipparser2 -losip2  -o linphonec  linphonec.o
> >>>commands.o ../coreapi/liblinphone.la -ldl
> >>>armv4l-unknown-linux-gcc -Wall -Werror -DENABLE_TRACE -D_ORTP_SOURCE
> >>>-O2 -fno-exceptions -I../support -o .libs/linphonec linphonec.o
> >>>commands.o  ../oRTP/src/.libs/libortp.so -L/armbuild/usr/lib -lspeex
> >>>-lm -losipparser2 -losip2 ../coreapi/.libs/liblinphone.so -ldl
> >>>armv4l-unknown-linux-gcc: ../coreapi/.libs/liblinphone.so: No such
> >>>file or directory
> >>>make[2]: *** [linphonec] Error 1
> >>>make[2]: Leaving directory
> >>>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
> >>>make[1]: *** [all-recursive] Error 1
> >>>make[1]: Leaving directory
> >>>`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0'
> >>>make: *** [all] Error 2
> >>>''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
> >>>' ''''''''''''''''''''''''''''''''''''''''' please help me to solve it.
> >>>
> >>>Thanks
> >>>-Kushal
> >>>
> >>>Kushal Dalal
> >>>Embedded Engineer
> >>>eInfochips Limited.
> >>>Email: [hidden email]
> >>>
> >>>Simon Morlat wrote:
> >>>>I think I already see that with arm-gcc-2.95: just turn off
> >>>> optimisation (remove -02 in the gsmlib/Makefile) and it works.
> >>>>
> >>>>Simon
> >>>>
> >>>>Le Mercredi 19 Octobre 2005 13:28, Kushal Dalal a écrit :
> >>>>>Hello,
> >>>>>
> >>>>>Thanks. I am able to compile Speex-1.0.5 with my toolchain.
> >>>>>Previously I was trying Speex-1.1.6. It's ok as it is enough.
> >>>>>Now while compiling linphone as mentioned in README.arm,
> >>>>>it gives following error.
> >>>>>I have pasted that part..
> >>>>>
> >>>>>""""""""""""""""""
> >>>>>source='code.c' object='code.lo' libtool=yes \
> >>>>>depfile='.deps/code.Plo' tmpdepfile='.deps/code.TPlo' \
> >>>>>depmode=gcc /bin/sh ../depcomp \
> >>>>>/bin/sh ../libtool --mode=compile armv4l-unknown-linux-gcc
> >>>>>-DHAVE_CONFIG_H -I. -I. -I..   -O2 -fno-exceptions -w -O2
> >>>>>-fno-exceptions -I../support -c -o code.lo code.c
> >>>>>armv4l-unknown-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -O2
> >>>>>-fno-exceptions -w -O2 -fno-exceptions -I../support -c code.c
> >>>>>-Wp,-MD,.deps/code.TPlo  -fPIC -DPIC -o .libs/code.o
> >>>>>/tmp/ccM7d2bX.s: Assembler messages:
> >>>>>/tmp/ccM7d2bX.s:96: Error: Can not represent OFFSET_IMM8 relocation in
> >>>>>this object file format (1)
> >>>>>/tmp/ccM7d2bX.s:98: Error: Can not represent OFFSET_IMM8 relocation in
> >>>>>this object file format (1)
> >>>>>make: *** [code.lo] Error 1
> >>>>>"""""""""""""""""""""""""""""""""""""""""""""
> >>>>>Can I compile without GSM codec as I don't need it?
> >>>>>Or how to solve above problem?
> >>>>>
> >>>>>Thanks in advance.
> >>>>>-Kushal
> >>>>>
> >>>>>Kushal Dalal
> >>>>>Embedded Engineer
> >>>>>eInfochips Limited.
> >>>>>Email: [hidden email]
> >>>>>
> >>>>>Simon Morlat wrote:
> >>>>>>Hello,
> >>>>>>
> >>>>>>The speex dependency is mandatory.
> >>>>>>However it is quite easy to cross compile speex on arm:
> >>>>>>
> >>>>>>taken from my README.arm in linphone's tree:
> >>>>>>
> >>>>>>Cross compiling speex for ARM:
> >>>>>>********************************
> >>>>>>First you need to remove ogg headers from your build system to avoid
> >>>>>> a dirty conflict between
> >>>>>>your build machine binaries and the arm binaries. They are usually in
> >>>>>> a libogg-dev package (rpm or deb).
> >>>>>>Then:
> >>>>>>./configure --prefix=/usr --host=arm-linux --with-gnu-ld
> >>>>>>--disable-static --enable-fixed-point --enable-arm-asm
> >>>>>>make
> >>>>>>make install DESTDIR=$ARM_INSTALL_TREE
> >>>>>>make install DESTDIR='pwd'/armbuild
> >>>>>>
> >>>>>>Simon
> >>>>>>
> >>>>>>Le Mardi 18 Octobre 2005 15:17, Kushal Dalal a écrit :
> >>>>>>>Hello,
> >>>>>>>
> >>>>>>>I am cross compiling linphonec-1.1.0  for ARM - MIZI Embedded Linux
> >>>>>>>platform.(for Samsung S3C2410 board.)
> >>>>>>>I am using cross compilaton tool chain by MIZI.
> >>>>>>>I would like to remove speex depedancy for the package.
> >>>>>>>I tried "--with-speex=no" and "--without-speex" while running
> >>>>>>>configure script.
> >>>>>>>But it is not working. I think there is a bug in that script at
> >>>>>>> speex part. What could be the solution?
> >>>>>>>Even I am not able to cross compile Speex with my tool chain !!..
> >>>>>>>
> >>>>>>>Thanks in advance.
> >>>>>>>
> >>>>>>>-Kushal Dalal
> >>>>>>
> >>>>>>Disclaimer: This e-mail and any attachment is for authorized use by
> >>>>>> the intended recipients only. It may contain proprietary material,
> >>>>>> confidential information and/or be subject to legal privilege of
> >>>>>> eInfochips Ltd. If you have received this message in error, please
> >>>>>> notify the originator immediately. If you are not the intended
> >>>>>> recipient, you are notified that you are strictly Prohibited from
> >>>>>> retaining, using, copying, altering or disclosing the contents of
> >>>>>> this message.
> >>>>
> >>>>Disclaimer: This e-mail and any attachment is for authorized use by the
> >>>>intended recipients only. It may contain proprietary material,
> >>>>confidential information and/or be subject to legal privilege of
> >>>>eInfochips Ltd. If you have received this message in error, please
> >>>>notify the originator immediately. If you are not the intended
> >>>>recipient, you are notified that you are strictly Prohibited from
> >>>>retaining, using, copying, altering or disclosing the contents of this
> >>>>message.
> >
> >Disclaimer: This e-mail and any attachment is for authorized use by the
> > intended recipients only. It may contain proprietary material,
> > confidential information and/or be subject to legal privilege of
> > eInfochips Ltd. If you have received this message in error, please notify
> > the originator immediately. If you are not the intended recipient, you
> > are notified that you are strictly Prohibited from retaining, using,
> > copying, altering or disclosing the contents of this message.
>
> Disclaimer: This e-mail and any attachment is for authorized use by the
> intended recipients only. It may contain proprietary material, confidential
> information and/or be subject to legal privilege of eInfochips Ltd. If you
> have received this message in error, please notify the originator
> immediately. If you are not the intended recipient, you are notified that
> you are strictly Prohibited from retaining, using, copying, altering or
> disclosing the contents of this message.
>
>
> _______________________________________________
> Linphone-users mailing list
> [hidden email]
> http://lists.nongnu.org/mailman/listinfo/linphone-users


_______________________________________________
Linphone-users mailing list
[hidden email]
http://lists.nongnu.org/mailman/listinfo/linphone-users