Re: Welcome to the "Duplicity-talk" mailing list

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

Re: Welcome to the "Duplicity-talk" mailing list

duplicity-talk mailing list
I tried to restore a single file from an s3 backup and i keep getting this error back from duplicity

Download s3://bucketstuff/duplicity-inc.20170118T050003Z.to.20170118T110003Z.vol1.difftar.gpg failed (attempt #1, reason: BackendException: argument of type 'int' is not iterable)

could someone point me in the direction of what i need to do to resolve this as my backups are going up good, but its not a good thing I can't restore from them.

On Tue, Aug 15, 2017 at 2:04 PM, <[hidden email]> wrote:
Welcome to the [hidden email] mailing list!

To post to this list, send your message to:

  [hidden email]

General information about the mailing list is at:

  https://lists.nongnu.org/mailman/listinfo/duplicity-talk

If you ever want to unsubscribe or change your options (eg, switch to
or from digest mode, change your password, etc.), visit your
subscription page at:

  https://lists.nongnu.org/mailman/options/duplicity-talk/bloom%40opis-gaming.com


You can also make such adjustments via email by sending a message to:

  [hidden email]

with the word `help' in the subject or body (don't include the
quotes), and you will get back a message with instructions.

You must know your password to change your options (including changing
the password, itself) or to unsubscribe without confirmation.  It is:

  roixanuk

Normally, Mailman will remind you of your nongnu.org mailing list
passwords once every month, although you can disable this if you
prefer.  This reminder will also include instructions on how to
unsubscribe or change your account options.  There is also a button on
your options page that will email your current password to you.



--

---------------------------------------------------------------------------------------------------
NOTICE: The information contained in this electronic mail transmission is privileged and
confidential. It is intended for the sole use and viewing of the addressee(s). If you are not the
addressee(s), you are hereby notified that any disclosure, distribution, or other use of the information
contained herein, other than deletion, is strictly prohibited. Violation of this prohibition may result in civil
or criminal liability. If you have received this electronic mail in error, please notify the sender by way of
reply. Thank you for your consideration

_______________________________________________
Duplicity-talk mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/duplicity-talk
Reply | Threaded
Open this post in threaded view
|

Re: Welcome to the "Duplicity-talk" mailing list

duplicity-talk mailing list
what's your duplicity version? latest is 0.7.13.1.
  http://duplicity.nongnu.org/

do you use a recent boto?
  https://github.com/boto/boto/releases

..ede/duply.net

On 8/15/2017 20:08, Alex Bloom via Duplicity-talk wrote:

> I tried to restore a single file from an s3 backup and i keep getting this
> error back from duplicity
>
> Download
> s3://bucketstuff/duplicity-inc.20170118T050003Z.to.20170118T110003Z.vol1.difftar.gpg
> failed (attempt #1, reason: BackendException: argument of type 'int' is not
> iterable)
>
> could someone point me in the direction of what i need to do to resolve
> this as my backups are going up good, but its not a good thing I can't
> restore from them.
>
> On Tue, Aug 15, 2017 at 2:04 PM, <[hidden email]> wrote:
>
>> Welcome to the [hidden email] mailing list!
>>
>> To post to this list, send your message to:
>>
>>   [hidden email]
>>
>> General information about the mailing list is at:
>>
>>   https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>
>> If you ever want to unsubscribe or change your options (eg, switch to
>> or from digest mode, change your password, etc.), visit your
>> subscription page at:
>>
>>   https://lists.nongnu.org/mailman/options/duplicity-
>> talk/bloom%40opis-gaming.com
>>
>>
>> You can also make such adjustments via email by sending a message to:
>>
>>   [hidden email]
>>
>> with the word `help' in the subject or body (don't include the
>> quotes), and you will get back a message with instructions.
>>
>> You must know your password to change your options (including changing
>> the password, itself) or to unsubscribe without confirmation.  It is:
>>
>>   roixanuk
>>
>> Normally, Mailman will remind you of your nongnu.org mailing list
>> passwords once every month, although you can disable this if you
>> prefer.  This reminder will also include instructions on how to
>> unsubscribe or change your account options.  There is also a button on
>> your options page that will email your current password to you.
>>
>
>
>
>
>
> _______________________________________________
> Duplicity-talk mailing list
> [hidden email]
> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>


_______________________________________________
Duplicity-talk mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/duplicity-talk
Reply | Threaded
Open this post in threaded view
|

Re: Welcome to the "Duplicity-talk" mailing list

duplicity-talk mailing list
Looks like im using duplicity 0.6.26 i installed via yum, its not providing a newer version. I assume thats my issue? And this is my first time hearing of boto im assuming its a python lib not sure how to check for that

On Tue, Aug 15, 2017 at 2:33 PM, edgar.soldin--- via Duplicity-talk <[hidden email]> wrote:
what's your duplicity version? latest is 0.7.13.1.
  http://duplicity.nongnu.org/

do you use a recent boto?
  https://github.com/boto/boto/releases

..ede/duply.net

On 8/15/2017 20:08, Alex Bloom via Duplicity-talk wrote:
> I tried to restore a single file from an s3 backup and i keep getting this
> error back from duplicity
>
> Download
> s3://bucketstuff/duplicity-inc.20170118T050003Z.to.20170118T110003Z.vol1.difftar.gpg
> failed (attempt #1, reason: BackendException: argument of type 'int' is not
> iterable)
>
> could someone point me in the direction of what i need to do to resolve
> this as my backups are going up good, but its not a good thing I can't
> restore from them.
>
> On Tue, Aug 15, 2017 at 2:04 PM, <[hidden email]> wrote:
>
>> Welcome to the [hidden email] mailing list!
>>
>> To post to this list, send your message to:
>>
>>   [hidden email]
>>
>> General information about the mailing list is at:
>>
>>   https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>
>> If you ever want to unsubscribe or change your options (eg, switch to
>> or from digest mode, change your password, etc.), visit your
>> subscription page at:
>>
>>   https://lists.nongnu.org/mailman/options/duplicity-
>> talk/bloom%40opis-gaming.com
>>
>>
>> You can also make such adjustments via email by sending a message to:
>>
>>   [hidden email]
>>
>> with the word `help' in the subject or body (don't include the
>> quotes), and you will get back a message with instructions.
>>
>> You must know your password to change your options (including changing
>> the password, itself) or to unsubscribe without confirmation.  It is:
>>
>>   roixanuk
>>
>> Normally, Mailman will remind you of your nongnu.org mailing list
>> passwords once every month, although you can disable this if you
>> prefer.  This reminder will also include instructions on how to
>> unsubscribe or change your account options.  There is also a button on
>> your options page that will email your current password to you.
>>
>
>
>
>
>
> _______________________________________________
> Duplicity-talk mailing list
> [hidden email]
> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>


_______________________________________________
Duplicity-talk mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/duplicity-talk



--

---------------------------------------------------------------------------------------------------
NOTICE: The information contained in this electronic mail transmission is privileged and
confidential. It is intended for the sole use and viewing of the addressee(s). If you are not the
addressee(s), you are hereby notified that any disclosure, distribution, or other use of the information
contained herein, other than deletion, is strictly prohibited. Violation of this prohibition may result in civil
or criminal liability. If you have received this electronic mail in error, please notify the sender by way of
reply. Thank you for your consideration

_______________________________________________
Duplicity-talk mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/duplicity-talk
Reply | Threaded
Open this post in threaded view
|

Re: Welcome to the "Duplicity-talk" mailing list

duplicity-talk mailing list
Alex,

you can always install manually from tgz. here is a mini howto under 'INSTALL MULTIPLE VERSIONS'
  http://duply.net/wiki/index.php/Duply-documentation

boto is the python lib used to access s3. you can download the latest to a folder of your choice and add the folder to a PYTHONPATH environment variable to run your newly installed latest duplicity.

but maybe there is a recent duplicity/boto for your distro? i am not keeping up with all of them.

..ede/duply.net


On 8/15/2017 21:09, Alex Bloom via Duplicity-talk wrote:

> Looks like im using duplicity 0.6.26 i installed via yum, its not providing
> a newer version. I assume thats my issue? And this is my first time hearing
> of boto im assuming its a python lib not sure how to check for that
>
> On Tue, Aug 15, 2017 at 2:33 PM, edgar.soldin--- via Duplicity-talk <
> [hidden email]> wrote:
>
>> what's your duplicity version? latest is 0.7.13.1.
>>   http://duplicity.nongnu.org/
>>
>> do you use a recent boto?
>>   https://github.com/boto/boto/releases
>>
>> ..ede/duply.net
>>
>> On 8/15/2017 20:08, Alex Bloom via Duplicity-talk wrote:
>>> I tried to restore a single file from an s3 backup and i keep getting
>> this
>>> error back from duplicity
>>>
>>> Download
>>> s3://bucketstuff/duplicity-inc.20170118T050003Z.to.
>> 20170118T110003Z.vol1.difftar.gpg
>>> failed (attempt #1, reason: BackendException: argument of type 'int' is
>> not
>>> iterable)
>>>
>>> could someone point me in the direction of what i need to do to resolve
>>> this as my backups are going up good, but its not a good thing I can't
>>> restore from them.
>>>
>>> On Tue, Aug 15, 2017 at 2:04 PM, <[hidden email]>
>> wrote:
>>>
>>>> Welcome to the [hidden email] mailing list!
>>>>
>>>> To post to this list, send your message to:
>>>>
>>>>   [hidden email]
>>>>
>>>> General information about the mailing list is at:
>>>>
>>>>   https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>>
>>>> If you ever want to unsubscribe or change your options (eg, switch to
>>>> or from digest mode, change your password, etc.), visit your
>>>> subscription page at:
>>>>
>>>>   https://lists.nongnu.org/mailman/options/duplicity-
>>>> talk/bloom%40opis-gaming.com
>>>>
>>>>
>>>> You can also make such adjustments via email by sending a message to:
>>>>
>>>>   [hidden email]
>>>>
>>>> with the word `help' in the subject or body (don't include the
>>>> quotes), and you will get back a message with instructions.
>>>>
>>>> You must know your password to change your options (including changing
>>>> the password, itself) or to unsubscribe without confirmation.  It is:
>>>>
>>>>   roixanuk
>>>>
>>>> Normally, Mailman will remind you of your nongnu.org mailing list
>>>> passwords once every month, although you can disable this if you
>>>> prefer.  This reminder will also include instructions on how to
>>>> unsubscribe or change your account options.  There is also a button on
>>>> your options page that will email your current password to you.
>>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Duplicity-talk mailing list
>>> [hidden email]
>>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>
>>
>>
>> _______________________________________________
>> Duplicity-talk mailing list
>> [hidden email]
>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>
>
>
>
>
>
> _______________________________________________
> Duplicity-talk mailing list
> [hidden email]
> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>


_______________________________________________
Duplicity-talk mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/duplicity-talk
Reply | Threaded
Open this post in threaded view
|

Re: Welcome to the "Duplicity-talk" mailing list

duplicity-talk mailing list
I should probably mention im using duply as the frontend to duplicity.

On Tue, Aug 15, 2017 at 3:18 PM, edgar.soldin--- via Duplicity-talk <[hidden email]> wrote:
Alex,

you can always install manually from tgz. here is a mini howto under 'INSTALL MULTIPLE VERSIONS'
  http://duply.net/wiki/index.php/Duply-documentation

boto is the python lib used to access s3. you can download the latest to a folder of your choice and add the folder to a PYTHONPATH environment variable to run your newly installed latest duplicity.

but maybe there is a recent duplicity/boto for your distro? i am not keeping up with all of them.

..ede/duply.net


On 8/15/2017 21:09, Alex Bloom via Duplicity-talk wrote:
> Looks like im using duplicity 0.6.26 i installed via yum, its not providing
> a newer version. I assume thats my issue? And this is my first time hearing
> of boto im assuming its a python lib not sure how to check for that
>
> On Tue, Aug 15, 2017 at 2:33 PM, edgar.soldin--- via Duplicity-talk <
> [hidden email]> wrote:
>
>> what's your duplicity version? latest is 0.7.13.1.
>>   http://duplicity.nongnu.org/
>>
>> do you use a recent boto?
>>   https://github.com/boto/boto/releases
>>
>> ..ede/duply.net
>>
>> On 8/15/2017 20:08, Alex Bloom via Duplicity-talk wrote:
>>> I tried to restore a single file from an s3 backup and i keep getting
>> this
>>> error back from duplicity
>>>
>>> Download
>>> s3://bucketstuff/duplicity-inc.20170118T050003Z.to.
>> 20170118T110003Z.vol1.difftar.gpg
>>> failed (attempt #1, reason: BackendException: argument of type 'int' is
>> not
>>> iterable)
>>>
>>> could someone point me in the direction of what i need to do to resolve
>>> this as my backups are going up good, but its not a good thing I can't
>>> restore from them.
>>>
>>> On Tue, Aug 15, 2017 at 2:04 PM, <[hidden email]>
>> wrote:
>>>
>>>> Welcome to the [hidden email] mailing list!
>>>>
>>>> To post to this list, send your message to:
>>>>
>>>>   [hidden email]
>>>>
>>>> General information about the mailing list is at:
>>>>
>>>>   https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>>
>>>> If you ever want to unsubscribe or change your options (eg, switch to
>>>> or from digest mode, change your password, etc.), visit your
>>>> subscription page at:
>>>>
>>>>   https://lists.nongnu.org/mailman/options/duplicity-
>>>> talk/bloom%40opis-gaming.com
>>>>
>>>>
>>>> You can also make such adjustments via email by sending a message to:
>>>>
>>>>   [hidden email]
>>>>
>>>> with the word `help' in the subject or body (don't include the
>>>> quotes), and you will get back a message with instructions.
>>>>
>>>> You must know your password to change your options (including changing
>>>> the password, itself) or to unsubscribe without confirmation.  It is:
>>>>
>>>>   roixanuk
>>>>
>>>> Normally, Mailman will remind you of your nongnu.org mailing list
>>>> passwords once every month, although you can disable this if you
>>>> prefer.  This reminder will also include instructions on how to
>>>> unsubscribe or change your account options.  There is also a button on
>>>> your options page that will email your current password to you.
>>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Duplicity-talk mailing list
>>> [hidden email]
>>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>
>>
>>
>> _______________________________________________
>> Duplicity-talk mailing list
>> [hidden email]
>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>
>
>
>
>
>
> _______________________________________________
> Duplicity-talk mailing list
> [hidden email]
> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>


_______________________________________________
Duplicity-talk mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/duplicity-talk



--

---------------------------------------------------------------------------------------------------
NOTICE: The information contained in this electronic mail transmission is privileged and
confidential. It is intended for the sole use and viewing of the addressee(s). If you are not the
addressee(s), you are hereby notified that any disclosure, distribution, or other use of the information
contained herein, other than deletion, is strictly prohibited. Violation of this prohibition may result in civil
or criminal liability. If you have received this electronic mail in error, please notify the sender by way of
reply. Thank you for your consideration

_______________________________________________
Duplicity-talk mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/duplicity-talk
Reply | Threaded
Open this post in threaded view
|

Re: Welcome to the "Duplicity-talk" mailing list

duplicity-talk mailing list
i am honored! makes no difference though as your issue is w/ duplicity ;).. ede/duply.net

On 8/15/2017 21:19, Alex Bloom wrote:

> I should probably mention im using duply as the frontend to duplicity.
>
> On Tue, Aug 15, 2017 at 3:18 PM, edgar.soldin--- via Duplicity-talk <
> [hidden email]> wrote:
>
>> Alex,
>>
>> you can always install manually from tgz. here is a mini howto under
>> 'INSTALL MULTIPLE VERSIONS'
>>   http://duply.net/wiki/index.php/Duply-documentation
>>
>> boto is the python lib used to access s3. you can download the latest to a
>> folder of your choice and add the folder to a PYTHONPATH environment
>> variable to run your newly installed latest duplicity.
>>
>> but maybe there is a recent duplicity/boto for your distro? i am not
>> keeping up with all of them.
>>
>> ..ede/duply.net
>>
>>
>> On 8/15/2017 21:09, Alex Bloom via Duplicity-talk wrote:
>>> Looks like im using duplicity 0.6.26 i installed via yum, its not
>> providing
>>> a newer version. I assume thats my issue? And this is my first time
>> hearing
>>> of boto im assuming its a python lib not sure how to check for that
>>>
>>> On Tue, Aug 15, 2017 at 2:33 PM, edgar.soldin--- via Duplicity-talk <
>>> [hidden email]> wrote:
>>>
>>>> what's your duplicity version? latest is 0.7.13.1.
>>>>   http://duplicity.nongnu.org/
>>>>
>>>> do you use a recent boto?
>>>>   https://github.com/boto/boto/releases
>>>>
>>>> ..ede/duply.net
>>>>
>>>> On 8/15/2017 20:08, Alex Bloom via Duplicity-talk wrote:
>>>>> I tried to restore a single file from an s3 backup and i keep getting
>>>> this
>>>>> error back from duplicity
>>>>>
>>>>> Download
>>>>> s3://bucketstuff/duplicity-inc.20170118T050003Z.to.
>>>> 20170118T110003Z.vol1.difftar.gpg
>>>>> failed (attempt #1, reason: BackendException: argument of type 'int' is
>>>> not
>>>>> iterable)
>>>>>
>>>>> could someone point me in the direction of what i need to do to resolve
>>>>> this as my backups are going up good, but its not a good thing I can't
>>>>> restore from them.
>>>>>
>>>>> On Tue, Aug 15, 2017 at 2:04 PM, <[hidden email]>
>>>> wrote:
>>>>>
>>>>>> Welcome to the [hidden email] mailing list!
>>>>>>
>>>>>> To post to this list, send your message to:
>>>>>>
>>>>>>   [hidden email]
>>>>>>
>>>>>> General information about the mailing list is at:
>>>>>>
>>>>>>   https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>>>>
>>>>>> If you ever want to unsubscribe or change your options (eg, switch to
>>>>>> or from digest mode, change your password, etc.), visit your
>>>>>> subscription page at:
>>>>>>
>>>>>>   https://lists.nongnu.org/mailman/options/duplicity-
>>>>>> talk/bloom%40opis-gaming.com
>>>>>>
>>>>>>
>>>>>> You can also make such adjustments via email by sending a message to:
>>>>>>
>>>>>>   [hidden email]
>>>>>>
>>>>>> with the word `help' in the subject or body (don't include the
>>>>>> quotes), and you will get back a message with instructions.
>>>>>>
>>>>>> You must know your password to change your options (including changing
>>>>>> the password, itself) or to unsubscribe without confirmation.  It is:
>>>>>>
>>>>>>   roixanuk
>>>>>>
>>>>>> Normally, Mailman will remind you of your nongnu.org mailing list
>>>>>> passwords once every month, although you can disable this if you
>>>>>> prefer.  This reminder will also include instructions on how to
>>>>>> unsubscribe or change your account options.  There is also a button on
>>>>>> your options page that will email your current password to you.
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Duplicity-talk mailing list
>>>>> [hidden email]
>>>>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Duplicity-talk mailing list
>>>> [hidden email]
>>>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Duplicity-talk mailing list
>>> [hidden email]
>>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>
>>
>>
>> _______________________________________________
>> Duplicity-talk mailing list
>> [hidden email]
>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>
>
>
>


_______________________________________________
Duplicity-talk mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/duplicity-talk
Reply | Threaded
Open this post in threaded view
|

Re: Welcome to the "Duplicity-talk" mailing list

duplicity-talk mailing list
I've since upgraded and fixed the config file that things are working again. Now im running into a new problem with my restoring of a file.

Traceback (most recent call last):
  File "/usr/local/bin/duplicity", line 1540, in <module>
    with_tempdir(main)
  File "/usr/local/bin/duplicity", line 1534, in with_tempdir
    fn()
  File "/usr/local/bin/duplicity", line 1385, in main
    do_backup(action)
  File "/usr/local/bin/duplicity", line 1462, in do_backup
    restore(col_stats)
  File "/usr/local/bin/duplicity", line 728, in restore
    restore_get_patched_rop_iter(col_stats)):
  File "/usr/lib64/python2.6/site-packages/duplicity/patchdir.py", line 558, in Write_ROPaths
    for ropath in rop_iter:
  File "/usr/lib64/python2.6/site-packages/duplicity/patchdir.py", line 521, in integrate_patch_iters
    for patch_seq in collated:
  File "/usr/lib64/python2.6/site-packages/duplicity/patchdir.py", line 389, in yield_tuples
    setrorps(overflow, elems)
  File "/usr/lib64/python2.6/site-packages/duplicity/patchdir.py", line 378, in setrorps
    elems[i] = iter_list[i].next()
  File "/usr/lib64/python2.6/site-packages/duplicity/patchdir.py", line 107, in filter_path_iter
    for path in path_iter:
  File "/usr/lib64/python2.6/site-packages/duplicity/patchdir.py", line 121, in difftar2path_iter
    tarinfo_list = [tar_iter.next()]
  File "/usr/lib64/python2.6/site-packages/duplicity/patchdir.py", line 339, in next
    self.set_tarfile()
  File "/usr/lib64/python2.6/site-packages/duplicity/patchdir.py", line 333, in set_tarfile
    self.current_fp = self.fileobj_iter.next()
  File "/usr/local/bin/duplicity", line 765, in get_fileobj_iter
    manifest.volume_info_dict[vol_num])
  File "/usr/local/bin/duplicity", line 808, in restore_get_enc_fileobj
    fileobj = tdp.filtered_open_with_delete("rb")
  File "/usr/lib64/python2.6/site-packages/duplicity/dup_temp.py", line 120, in filtered_open_with_delete
    fh = FileobjHooked(path.DupPath.filtered_open(self, mode))
  File "/usr/lib64/python2.6/site-packages/duplicity/path.py", line 779, in filtered_open
    return gpg.GPGFile(False, self, gpg_profile)
  File "/usr/lib64/python2.6/site-packages/duplicity/gpg.py", line 217, in __init__
    'logger': self.logger_fp})
  File "/usr/lib64/python2.6/site-packages/duplicity/gpginterface.py", line 374, in run
    create_fhs, attach_fhs)
  File "/usr/lib64/python2.6/site-packages/duplicity/gpginterface.py", line 402, in _attach_fork_exec
    pipe = os.pipe()
OSError: [Errno 24] Too many open files


my ulimit -a is showing open files as 4096 as i adjusted it to that and im still having issues. I'm trying to fetch a single file out of the s3 backup. Any ideas, this is a blocker for me trying to restore a file.


On Tue, Aug 15, 2017 at 3:23 PM, <[hidden email]> wrote:
i am honored! makes no difference though as your issue is w/ duplicity ;).. ede/duply.net

On 8/15/2017 21:19, Alex Bloom wrote:
> I should probably mention im using duply as the frontend to duplicity.
>
> On Tue, Aug 15, 2017 at 3:18 PM, edgar.soldin--- via Duplicity-talk <
> [hidden email]> wrote:
>
>> Alex,
>>
>> you can always install manually from tgz. here is a mini howto under
>> 'INSTALL MULTIPLE VERSIONS'
>>   http://duply.net/wiki/index.php/Duply-documentation
>>
>> boto is the python lib used to access s3. you can download the latest to a
>> folder of your choice and add the folder to a PYTHONPATH environment
>> variable to run your newly installed latest duplicity.
>>
>> but maybe there is a recent duplicity/boto for your distro? i am not
>> keeping up with all of them.
>>
>> ..ede/duply.net
>>
>>
>> On 8/15/2017 21:09, Alex Bloom via Duplicity-talk wrote:
>>> Looks like im using duplicity 0.6.26 i installed via yum, its not
>> providing
>>> a newer version. I assume thats my issue? And this is my first time
>> hearing
>>> of boto im assuming its a python lib not sure how to check for that
>>>
>>> On Tue, Aug 15, 2017 at 2:33 PM, edgar.soldin--- via Duplicity-talk <
>>> [hidden email]> wrote:
>>>
>>>> what's your duplicity version? latest is 0.7.13.1.
>>>>   http://duplicity.nongnu.org/
>>>>
>>>> do you use a recent boto?
>>>>   https://github.com/boto/boto/releases
>>>>
>>>> ..ede/duply.net
>>>>
>>>> On 8/15/2017 20:08, Alex Bloom via Duplicity-talk wrote:
>>>>> I tried to restore a single file from an s3 backup and i keep getting
>>>> this
>>>>> error back from duplicity
>>>>>
>>>>> Download
>>>>> s3://bucketstuff/duplicity-inc.20170118T050003Z.to.
>>>> 20170118T110003Z.vol1.difftar.gpg
>>>>> failed (attempt #1, reason: BackendException: argument of type 'int' is
>>>> not
>>>>> iterable)
>>>>>
>>>>> could someone point me in the direction of what i need to do to resolve
>>>>> this as my backups are going up good, but its not a good thing I can't
>>>>> restore from them.
>>>>>
>>>>> On Tue, Aug 15, 2017 at 2:04 PM, <[hidden email]>
>>>> wrote:
>>>>>
>>>>>> Welcome to the [hidden email] mailing list!
>>>>>>
>>>>>> To post to this list, send your message to:
>>>>>>
>>>>>>   [hidden email]
>>>>>>
>>>>>> General information about the mailing list is at:
>>>>>>
>>>>>>   https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>>>>
>>>>>> If you ever want to unsubscribe or change your options (eg, switch to
>>>>>> or from digest mode, change your password, etc.), visit your
>>>>>> subscription page at:
>>>>>>
>>>>>>   https://lists.nongnu.org/mailman/options/duplicity-
>>>>>> talk/bloom%40opis-gaming.com
>>>>>>
>>>>>>
>>>>>> You can also make such adjustments via email by sending a message to:
>>>>>>
>>>>>>   [hidden email]
>>>>>>
>>>>>> with the word `help' in the subject or body (don't include the
>>>>>> quotes), and you will get back a message with instructions.
>>>>>>
>>>>>> You must know your password to change your options (including changing
>>>>>> the password, itself) or to unsubscribe without confirmation.  It is:
>>>>>>
>>>>>>   roixanuk
>>>>>>
>>>>>> Normally, Mailman will remind you of your nongnu.org mailing list
>>>>>> passwords once every month, although you can disable this if you
>>>>>> prefer.  This reminder will also include instructions on how to
>>>>>> unsubscribe or change your account options.  There is also a button on
>>>>>> your options page that will email your current password to you.
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Duplicity-talk mailing list
>>>>> [hidden email]
>>>>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Duplicity-talk mailing list
>>>> [hidden email]
>>>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Duplicity-talk mailing list
>>> [hidden email]
>>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>>
>>
>>
>> _______________________________________________
>> Duplicity-talk mailing list
>> [hidden email]
>> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>>
>
>
>




--

---------------------------------------------------------------------------------------------------
NOTICE: The information contained in this electronic mail transmission is privileged and
confidential. It is intended for the sole use and viewing of the addressee(s). If you are not the
addressee(s), you are hereby notified that any disclosure, distribution, or other use of the information
contained herein, other than deletion, is strictly prohibited. Violation of this prohibition may result in civil
or criminal liability. If you have received this electronic mail in error, please notify the sender by way of
reply. Thank you for your consideration

_______________________________________________
Duplicity-talk mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/duplicity-talk
Reply | Threaded
Open this post in threaded view
|

Re: Welcome to the "Duplicity-talk" mailing list

duplicity-talk mailing list
On 08/17/2017 03:10 PM, Alex Bloom via Duplicity-talk wrote:

> I've since upgraded and fixed the config file that things are working
> again. Now im running into a new problem with my restoring of a file.
>
> [...]
> OSError: [Errno 24] Too many open files
>
>
> my ulimit -a is showing open files as 4096 as i adjusted it to that
> and im still having issues. I'm trying to fetch a single file out of
> the s3 backup. Any ideas, this is a blocker for me trying to restore a
> file.
>

I've ran into similar error (during 'verify', I think) and ended up
setting ulimit -n 500000.  My *guess* is that there is a bug somewhere
such that files are not closed when they should be, but never looked
into it.
(BTW, I am sure that my 500000 is larger than I probably need, but after
several incremental increases decided to go "all out". If I recall, I
had to google around to find some setting in sysctl (or similar) to
allow me to set the ulimit that high).





_______________________________________________
Duplicity-talk mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/duplicity-talk